For a field-proven
100-Megawatt Laser
New TRG 104A meets requirements
both in the lab and "on the line".
For the industrial laser technologist and the
scientific researcher, the new TRG 104A is a
rugged, reliable, versatile and economical
laser system. It is already functioning under
a wide range of operating conditions for such
applications as: atmospheric studies, ballistic
research, chemical research, high-speed pho-
tography, medical and biological research,
optical ranging, vacuum evaporation of thin
films, microwelding, optical machining. Spe-
cial features include: Maintenance-free oper-
ation in excess of 25,000 cycles. Flashlamp
replacement without realignment of optics.
Simple function switch for rapid selection of
either normal pulse or Q-switched operation.
Optical alignment maintained under normal
operating conditions of shock and vibration.
For more complete information write: TRG
Inc., Section LF, Route 110, Melville (Long
Island), New York 11746 Tel. (516) 531-6343.
Accessories
104A-4 — Second Harmonic
Generator
104A-5 — Liquid Q-switch
104A-6 — Single Pulse Accessory
104A-7 — Base Plate
104A-8 — Base Plate for 104A Laser
and 109A Accessory
Specifications
Output
Normal Mode 3 to 5 joules
Q-switched Mode...1 to 1.5 joules
Wavelength 6943A or 10600A
Minimum Recycle Time 15 seconds
Povver 100 Megawatts plus
TCI)
CONTROL DATA
TRG / A Subsidiary of
Control Data Corporation
TRG INCORPORATED - ROUTE 110 - MELVILLE, N.Y. 11746
ELECTRO-OPTICAL PRODUCTS
October 1966
ENERGY AND POWER MEASURING DEVICES
MODEL NUMBER DESCRIPTION
100 Ballistic Thermopile (1cm aperture) $
101 Ballistic Thermopile (1cm aperture)
Permits an oscilloscope observation of laser
output pulses in addition to measuring energy
output
102 Energy Meter for use w ith 100/101.
107 Ballistic Thermopile (2cm aperture)
108 Ballistic Thermopile (2cm aperture)
113 Energy Meter for use with 107/108
105B Photodetector
With S-4 Surface
With S— 1 or S-20 Surface
With S— 1 UV Surface
Minilaser - 300 Milli joules
Consists of: 103A— 1 Laser Power Supply
103A-2 Laser Head
104A Laser System and Accessories
104A-1 Laser Power Supply
104A-2 Laser Head
Supplied with Czochralski ruby
Supplied with Nd-HH- rod
104 A- 3 Rotating Prism Q-switch
104A-4 Second Harmonic Generator......
Specify wavelength, 6943A or 10600A, at which
SHG will be used
104A-5 Bleachable Q-switch
104A-6 Bleachable Single Pulse Accessory
This accessory is included as part of the
Model 104A-100 Megawatt Laser System. If
this Model 104A-6 Single Pulse Accessory is
purchased as an individual component or for
addition to an existing Model 104A Laser
System, the buyer should be aware that damage
to the laser crystal may occur due to the
higher achievable power densities. Check with
TRG Sales (516/531-6343) regarding questions
on how to utilize this accessory in the buyer s
system. Specify wavelength at which accessory
is to be used (6943A or 10600A) .
104A-7 Base Plate to aid precise aiming of
laser head
Standard Czochralski ruby rod with lucalox
holders * * * * *
Standard Czochralski ruby rod, without holders,
ground for 104A— 2 Laser Head. • • * •
Nd+++ doped glass laser rod including UV filter
and holder **'*'"’'*
doped glass rod, without filter and holder,
ground for 104A— 2 Laser Head
LASER SYSTEMS
103A
PRICE
385.00
525.00
585.00
550.00
690.00
585.00
1500.00
1850.00
1850.00
1000.00
1000.00
2950.00
2090.00
1950.00
2200.00
950.00
750.00
500.00
250.00
690. 00
615.00
375. 00
350.00
m /a subsidiary of control data corporation
/
Dielectric coate$ output reflector (Specify
6 94 3 A or 10600A)
Cavity reflector for 104A-2 Laser Head
Resonant reflector for 104A-2 Laser Head
Replacement flash lamps for 104A-2 Laser Head....
Model 104A Laser System capable of 100 megawatt output
Model 104A Laser System capable of 100 megawatt output with beam
divergence of less than 3 milliradians
Model 200B Laser System capable of 100 megawatt output at 15 pf &. .
Model 300 Series
Model 301 Laser System capable of 250 megawatt output
Model 302 Laser System capable of 600 megawatt output
Model 303 Laser System capable of 1000 megawatt output
LASER ACCESSORIES
109A Daly-Sims Accessory
104A-8 Base Plate - to facilitate mounting and alignment
of the 104A Laser System with the 109 Daly-Sims
Accessory independent of an optical bench
LASER SAFETY EYESHIELDS
112 Laser Safety Eyeshields
BIOLOGICAL LASER SYSTEM
513 Biolaser System .
Designed specifically for Leitz microscopes but
adapters are available for other microscopes.
Contact TRG Sales regarding customers' require-
ments.
Consists of: 103A Minilaser
153A Coupling with 513-4
Safety Interlock
Accessories:
153A-5 Camera Adapter including Optics and
Dichroic Filter (Specify camera to be used)
513-5 Substage Energy Monitor
102 Energy Meter
NOTE: (1) All delivery quotations are subject to prior sale.
(2) Prices and specifications are subject to change without
(3) This price list is in effect until May 1967.
SUBSIDIARY OF CONTROL
DATA CORPORATION
2 .
100.00
90.00
200.00
64 .50
8600.00
9600.00
19950.00
19950. 00
24950. 00
29950.00
1500.00
495.00
50.00
2000.00
1200.00
250.00
325.00
585.00
notice .
/ toners
manufacturers
of precision
scientific optical
and measuring
instruments
GAERTNER SCIENTIFIC CORPORATION / 1201 WRIGHTWOOD AVE., CHICAGO, ILL 60614 / 312 BU 1-5335 / CABLE: SCIENTIA
GO
GAERTNER®
December 21 , 1966
Nelsons Systems
Box 1 546
Poughkeepsie, N.Y.
Gentlemen :
Thank you for your
inquiry requesting
information on our products.
Enclosed is the General Index to
have available. Please indicate
Business reply card and return I
forwarded promptly*
tne literature that we currently
the bulletins you desire on the"
to us. The information will be
We will look forward to being of service.
Our local representative in your area is
6o4 E. 6th St., p.O. Box 11(46, Plainfiel
phone number is 753-488?.
Clarkson & foreman ,
, New Jersey. Their
Inc .
tele-
L WH : ar
Enc: Index-Card
an ¥. Higgins,
Director of Marketing
LASER SYSTEMS,
MEASURING DEVICES,
AND ACCESSORIES
TRG, A DIVISION OF CONTROL DATA CORPORATION
ROUTE 110, MELVILLE, NEW YORK (516) 531-6343
TRG’s new 104A Laser System has been designed specifically
to meet the needs of the scientific researcher and the industrial
laser technologist. A medium-power, economical laser system
that is capable of operation under a wide range of conditions
— including adaptability to those outside a laboratory environ-
accessories
104A-4 — Second Harmonic Generator
104A-5 — Liquid Q-switch
104A-6 — Single Pulse Accessory
104A-7 — Base Plate
104A-8 — Base Plate for 104A Laser and 109A Accessory
ment-the TRG 104A can be used for many applications, such
as: Atmospheric Studies; Ballistic Research; Chemical Research;
High-speed Photography; Medical and Biological Research; Op-
tical Ranging; Vacuum Evaporation of Thin Films; Microwelding.
specifications
Normal Mode Output 3 to 5 joules
Q-switched Mode Output 1 to 1.5 joules
Peak Power Output Available 100 megawatts plus
Wavelength 6943a or 1.06/t
Minimum Recycle Time 15 seconds
Model 1 03 A MINILASER SYSTEM...
The TRG Model 103 A Minilaser System is a versatile, lightweight
laser that produces repeatable outputs of controlled energy.
Designed primarily for the student or researcher whose require-
ments involve the techniques of laser technology, This system
can easily be adapted for use in solving optical, biological, and
many other laboratory and industrial problems.
specifications
Wavelength
Pulse Length
Repetition Rate
Uncooled
Cooled
Energy Input
Energy Output
Threshold
Effective Beam Diameter
Beam Divergence
Coating
Input Voltage
Trigger
Interconnecting Cables ...
6943 A or 1.06/*
150 fi sec.
1 per minute
1 pulse every 30 seconds
230 joules (max.)
0-300 millijoules (nominal)
150 joules (nominal)
5 mm
10 milliradians (nominal)
Multilayer dielectric
115/220 volts AC ±10%
Remote or panel push button
a. Line cord supplied
b. 6 foot cable connectors supplied
to connect 103A Laser Head
to power supply
^ Model 200B LASER SYSTEM...
The 200 Laser is a medium-powered system with outputs up to
15 pulses per second . The system can be operated in the
normal or Q-switched mode and closed cycle water cooling
systems are available.
specifications
Output Wavelength 6943A or 1.06/*
Maximum Pulse Energy
Normal Mode 3-5 joules
Q-switched Mode 0.5 joule
Peak Power Output Available ... 100 megawatts
Repetition Rate Variable 1-15 pps
Type of Q-switch Rotating prism with bleachable dye
(other Q-switches available on request)
Beam Divergence 3-5 milliradians
Series 300 LASER SYSTEMS...
The 300 Laser System series designates a line of high powered
high energy lasers with output powers up to one gigawatt and
repetition rates from 2 cycles per minute for laboratory use to
5 cycles per second for operational requirements.
specifications
MODEL 301
6943a or 1.Q6/* 6943 a or 1.06/* 6943 a or 1.06m
30 75 125
250 megawatts 600 megawatts 1 gigawatt
Available with repetition rates varying from 2 pulses per minute to 5 pulses per second
to meet individual specifications.
0.3 millisecond 0.6 millisecond 1 millisecond
15 nanoseconds 15 nanoseconds 15 nanoseconds
Rotating prism with bleachable dye (other Q-switches available on request)
3-5 milliradians 3-5 milliradians 3-5 milliradians
Output Wavelength
Maximum Energy in Joules
Peak Power Output Available
Pulse Repetition Rate
Pulse Length
Normal
Q-switched Mode
Type of Q-switch
Beam Divergence
MODEL 302 MODEL 303
Models 102 & 113 ENERGY METERS...
The TRG Model 102 and 113 Energy Meters are precision tran-
sistorized microvoltmeters designed specifically for use with
Thermopiles having outputs of 35 to 300 microvolts per joule
(such as the TRG Models 100, 101, 107 and 108 Ballistic Thermo-
piles). The meter is calibrated to read directly in joules.
specifications
MODEL 102
MODEL 113
Power
Ranges
Zero Stability
Input
Accuracy
Zero Suppression
Calibration
Optional Accessory
Size
Weight
Shipping Weight
Response Time
105 to 125 volts, or 208 to 220 VAC 50 to 400 Hz, 4Vi watts
9 overlapping ranges, 0.03 to 300 joules
±2 mj per day
100 to 300 microvolts per joule
±2% of full scale
±10% change in input voltage results in less than 1 mj
change in output.
±60 mj by means of 10-turn front-panel control
105 to 125 volts, or 208 to 220 VAC 50 to 400 Hz, 4Vi watts
9 overlapping ranges, 0.1 to 1000 joules
±2 mj per day
35 to 75 microvolts per joule
±2% of full scale
±10% change in input voltage results in less than 2 mj
change in output.
±250 mj by means of 10-turn front-panel control
Reads directly in joules, internally calibrated to the thermopile in use.
Battery operation with internal nickel-cadmium battery, charger internal.
10V 2 " x 7%" x 8%".
13 pounds
17 pounds
Less than 2.5 seconds on all scales
Models 100 & 101 BALLISTIC THERMOPILES...
Model 105B PHOTODETECTOR...
One-cm-diameter aperture types
MODEL 100 — A high-sensitivity, precision instrument offering
direct primary calorimetric measurement of laser outputs up to
300 joules over a dynamic range of 3 x 10 5 .
MODEL 105B — A detector containing a vacuum photodiode in-
corporated into a specially designed wide-band microwave struc-
ture. Each unit is individually calibrated to measure peak power
of fast rising optical wave forms.
specifications
MODEL 101 — Photodiode version of Model 100. Permits simul-
taneous energy measurement and observation of optical pulse
waveshapes.
^Models 107 & 108 BALLISTIC THERMOPILES.^
Two-cm-diameter aperture types
MODEL 107 — A large aperture unit designed to meet the re-
quirements of giant-pulse and large laser systems. Can handle
energies up to 1000 joules (normal mode) and peak powers in
the gigawatt range.
MODEL 108 - Photodiode version of Model 107. Permits simul-
taneous energy measurement and observation of optical pulse
waveshapes.
Rise Time less than 0.3 nanosecond
Bandwidth DC to 1.25 GHz
Output Impedance 125 ohms
Output 75 volts into 125-ohm load
Bias Required +2000 volts DC
Surface S-1 (U.V.) SJ. S4_ S-20
Spectral Response 2000-12000 3000-12000 3000-7000 3000-8500
Typical sensitivity 400-900 400-900 10-25 2000-5000
volts per megawatt
at 6943A across
125 ohms with
diffusing disk
(supplied)
MODEL 105-1 — Optical filter set for Model 105B Photodetector
consists of four calibrated optical filters to attenuate laser
pulse to prevent current saturation in the photodetector. Nom-
inal transmission values: 1%, 6%, 25%, 50% at 6943A.
Model 109A DALY - SIMS ACCESSORY...
The Model 109A Daly-Sims Accessory is an optical device that
uses the phenomenon of total internal reflection in a multiple-
reflection optical plate to increase the switching speed of a
rotating or oscillating prism Q-switch.
When used in conjunction with the TRG 104A Laser and Q-switch
System, single-pulse operation in the 30-megawatt range is
achieved. Although specifically designed for use with the Model
104A System, the 109A accessory can be used with any laser
resonator that has a rotating or oscillating reflector.
Model 112 LASER SAFETY EYESHI ELD...
TRG Laser Safety Eyeshields provide eye protection in the low
and medium energy pulse range and in the spectral range be-
tween 0.69 and 1.2 microns. They are designed for use
by persons working with ruby and neodymium lasers. The
special filter glass provides a reasonable assurance of safety to
a radiance of 10’ joules/cm 2 /steradian at 6943A. This glass
transmits sufficient ambient light to enable the wearer to work
without difficulty, and the hue of the transmitted light is not
psychologically disturbing. Clear plastic shield protects wearer
in the event filter glass shatters.
for detailed information call or write:
TRG, or our local representative.
Model 513 BIOLASER SYSTEM...
The versatile new TRG Biolaser offers the medical and biological
researcher a powerful new tool for use in studies at the cell
level. Specific areas of application are: cell microsurgery and
coagulation; electric field interaction; pathology; genetics; other
branches of microscopic research.
Adapters are available to permit simultaneous photography
and irradiation of the specimen. Cinemicrography, time-lapse
photography, and closed-circuit television techniques can be ap-
plied to broaden the instrument’s capabilities as a research tool.
SPECIAL FEATURES — The coherent light output of the Biolaser
can be focused to spots as small as one micron — A simple x-y
control permits precise spot positioning - Triggering can be
remote or by panel pushbutton.
specifications
Flux Density on Stage up to 10 4 Joules/cm 2
Wavelength *6943 %
Pulse Length 150/tsec.
Repetition Rate 1 /min.
Microscope Leitz Ortholux or Labolux standard; adapters
available for other microscopes
Camera I'M" x 3Vi" Polaroid standard; others optional
*Other wavelengths on request.
Printed in U.S.A.
TRG INCORPORATED - ROUTE 110 - MELVILLE , N.Y. 11746
ELECTRO-OPTICAL PRODUCTS
October 1966
&
ENERGY AND POWER MEASURING DEVICES
MODEL NUMBER
DESCRIPTION
100
101
102
107
108
113
105B
Ballistic Thermopile (1cm aperture)
Ballistic Thermopile (1cm aperture)
Permits an oscilloscope observation of laser
output pulses in addition to measuring energy
output
Energy Meter for use with 100/101
Ballistic Thermopile (2cm aperture).....
Ballistic Thermopile (2cm aperture)
Energy Meter for use with 107/108
Photodetector
With S-4 Surface...
With S— 1 or S-20 Surface
With S-l UV Surface
LASER SYSTEMS
103A Minilaser - 300 Milli joules
Consists of: 103A-1 Laser Power Supply
103A-2 Laser Head
104A Laser System and Accessories
104A-1 Laser Power Supply
104A-2 Laser Head...
Supplied with Czochralski ruby
Supplied with Nd+H-+ rod
104 A- 3 Rotating Prism Q- switch
104A-4 Second Harmonic Generator
Specify wavelength, 6943A or 10600A, at which
SHG will be used
104A-5 Bleachable Q- switch
104A-6 Bleachable Single Pulse Accessory
This accessory is included as part of the
Model 104A-100 Megawatt Laser System. If
this Model 104A— 6 Single Pulse Accessory is
purchased as an individual component or for
addition to an existing Model 104A Laser
System, the buyer should be aware that damage
to the laser crystal may occur due to the
higher achievable power densities. Check with
TRG Sales (516/531-6343) regarding questions
on how to utilize this accessory in the buyer's
system. Specify wavelength at which accessory
k is to be used (6943A or 10600A) .
104A-7 Base Plate to aid precise aiming of
laser head
Standard Czochralski ruby rod with lucalox
holders
Standard Czochralski ruby rod, without holders,
ground for 104A-2 Laser Head. •
Nd+++ doped glass laser rod including UV filter
and ho lder * ******* ‘ * *
doped glass rod, without filter and holder,
ground for 104A— 2 Laser Head.
PRICE
385.00
525.00
585.00
550.00
690.00
585.00
1500.00
1850.00
1850.00
1000. 00
1000.00
2950.00
2090.00
1950.00
2200.00
950.00
750.00
500.00
250.00
690. 00
615.00
375. 00
350.00
TRI] / a subsidiary of control data corporation
Dielectric coate^ output reflector (Specify
6943A or 10600A)
Cavity reflector for 104A-2 Laser Head
Resonant reflector for 104A-2 Laser Head
Replacement flash lamps for 104A-2 Laser Head....
Model 104A Laser System capable of 100 megawatt output
Model 104A Laser System capable of 100 megawatt output with beam
divergence of less than 3 milliradians
Model 200B Laser System capable of 100 megawatt output at 15 -
Model 300 Series
Model 301 Laser System capable of 250 megawatt output
Model 302 Laser System capable of 600 megawatt output . .
Model 303 Laser System capable of 1000 megawatt output
LASER ACCESSORIES
109A Daly-Sims Accessory
104A-8 Base Plate - to facilitate mounting and alignment
of the 104A Laser System with the 109 Daly-Sims
Accessory independent of an optical bench
LASER SAFETY EYESHIELDS
112 Laser Safety Eyeshields
BIOLOGICAL LASER SYSTEM
513 Biolaser System
Designed specifically for Leitz microscopes but
adapters are available for other microscopes.
Contact TRG Sales regarding customers' require-
ments.
Consists of: 103A Minilaser
153A Coupling with 513-4
Safety Interlock
Accessories:
153A-5 Camera Adapter including Optics and
Dichroic Filter (Specify camera to be used)
513-5 Substage Energy Monitor
102 Energy Meter..
NOTE: (1) All delivery quotations are subject to prior sale.
(2) Prices and specifications are subject to change without
(3) This price list is in effect until May 1967.
2 .
■al
100.00
90.00
200.00
64.50
8600. 00
9600. 00
19950.00
19950. 00
24950.00
29950.00
1500.00
495.00
50.00
2000.00
1200.00
250.00
325.00
585.00
notice .
/a subsidiary of control data corporation
MELVILLE, NEW YORK 11746
/ ,
p
ROUTE 110 •
CONTROL DATA
CORPORATION
• 516/531-0600
Dear Sir:
The literature you requested regarding our Model 513 Biolaser is
enclosed. The 513 is an improved design of our earlier 503 Bio-
laser which has been used extensively in the biological field.
You will note from the literature that the system is capable of
producing spot sizes as small as 111 and has the unique feature
that still or motion picture photography can be accomplished
simultaneously with the firing of the laser pulse.
The various applications to which this system has been applied
are described in the enclosed literature.
The 513 Biolaser with power supply for attachment to your micro-
scope is priced at $3200. Any adaptions necessary for optics,
camera, etc., can be supplied at additional cost. Accessories
are also available for monitoring the laser output at the stage.
Thank you for your inquiry, and we look forward to being of
service to you. Please contact us at the plant if you require
any additional information.
Sincerely ,
RF/Mc
Enclosure
7 y »t ft id- -do- 'u4j£i
Raymond Forestieri
Sales Engineer
/a subsidiary of control data corporation